Small - Detmold D95 P2 Respirator Mask

Small - Detmold D95 P2 Respirator Mask

Small - Detmold D95 P2 Respirator Mask

Exc GST
Buy 1 + Units: $73.70 / BOX
Availability: In stock
SKU
S103869
Available in Increments of 1
Small -  Detmold D95 P2 Respirator Mask with small Fitclip.
25 in a box

This is a single use mask to protect those working in healthcare, hospitals and clinical environments.

Made in Australia
Small - Detmold D95 P2 Respirator Mask
25 in a box

Our D95/P2 is a single use respirator mask.  This is designed to filter out non-oil based airborne particles. 
It features a lightweight flat fold design.
The mask expands into a convex-shape device with two bands and a FitClipTM to hold the mask in place.

The D95 P2 Respirator is designed to achieve a comfortable and adequate seal by joining the mask’s two bands with the FitClip™.
TheFitClip™ allows flexibility in the adequate fitting of respirators.
The FitClip™ offers a secure hold point on one end, and an open end for ease of attaching and removing the second mask band.
The Detmold Medical range of D95 P2 Respirators have the Regular Fitclip™ already attached, and where a longer band is required, the XL FitClip™ can be ordered separately.
An inadequate seal between the Respirator and the face can result in contaminated air entering the mask, please refer to your appropriate Respirator Fit Test Procedure to determine the required combination of mask and FitClip™.


Instructions for use:
Applying the Mask
Prior to doing this, ensure hand hygiene is undertaken first.

1. Move the Fitclip™ to the band on your preferred side for donning* .
2. Open the mask, flattening the nose piece.
3. Lean chin into the mask and lift bands toward the crown of the head, securing onto the Fitclip™.
4. Adjust mask bands for a secure and comfortable fit.
5. Using both hands, firmly mould nosepiece over bridge of the nose.
6. Pinch the nose piece (angled over the nostril) and drop the jaw gently allowing the mask to fit to the natural shape of your face.
7. Look left to right, then up and down ensuring there is no movement in the mask at the nose piece.
8. Inhale and exhale deeply checking for escape of air. If air is escaping, refit the mask

Removing the Mask Safely.
1. Without touching the mask, follow bands towards FitClip™ and gently unhook, keeping tension on the bands.
2. Lean forward maintaining control of the band tension, whilst slowly removing the mask away from the face. Ensure the mask does not flick forward or back onto the face.
3. Discard safely.

There should be no gaps between the face and mask, providing an adequate seal.  Once the mask is applied it should not be touched or reapplied. Appropriate hand hygiene should always be used.
More Information
Supplier Part NumberW575M1000
Pack NameBOX
Write Your Own Review
You're reviewing:Small - Detmold D95 P2 Respirator Mask
Your Rating
Who Viewed This Also Viewed
chat